Oil and Gas Filtration Solutions
Oil and Gas Filtration Application
Water treatment is essential through the whole oil & gas industry, form upstream to downstream.
The high quality water after filtered enhances production yields, same production cost, and protect environment from pollution.
Pullner provide comprehensive filtration and separation solutions, meet your requirement in oil and gas industry filtration.
High Flow Water Filter for Oil and Gas Filtration
The high flow filter cartridge is made of 6″(152mm) diameter, single open end, pleated technology, inside to outside flow pattern. Different material(PP, Glass fiber, Polyester) meet different applications request.
The pleat technology, combined with its large 6″(152mm) diameter and high performance media, allows you to use significantly fewer filters and smaller housings for high flow rate applications.
- Large diameter 6"(152mm), bigger filtration area, high flow rate
- Pleated technology, high dirt holding capacity
- Different material(PP, Glass fiber, Polyester) meet different temperature applications request.
- Length available 20"/40"/60"
- upstream condensate, injection water, boiler water, produced water, acid gas, process water, refining, Amine filtration.
Melt Blown Filter Cartridge for Oil and Gas Filtration
The melt blown filter cartridge is made of polypropylene microfiber hot-melt entanglement, All polypropylene construction, No surfactants, binders, or adhesives, Graded pore structure enhances dirt-holding capacity. It is a cost-effective filter element.
LNG Acid Gas, Midstream Process Water, Refinery Amine Systems, Upstream Injection Water & SRU, Midstream Acid Gas, Midstream Glycol Filtration
- All polypropylene construction, No surfactants, binders, or adhesives
- Graded pore structure enhances dirt-holding capacity
- Long service life, high cost-effective
Stainless Steel Filter for Oil and Gas Filtration
Stainless Steel Multi-layer Sintered Mesh Filter Cartridge is specifically designed to optimize particulate capture via its asymmetrical graded pore structure.
This structure exhibits the finest pores on the upstream side of the filter media, insuring the capture of particulates at the filters’ first surface, where they are easily removed by backwashing operations.
The sintering process insuring a “weld-bond” , no “binders” that might otherwise shed and contaminate downstream equipment and/or final product quality. Ranging from 3 to 100 μm.
Refinery:
FCC TSS & FSS Flue Gas; Catalyst Hopper Vent Gas, etc.
Mineral Processing:
Off-Gas Solids Recovery from Calciners, Incinerators, Fluid Bed Dryers, and Storage Silos
Chemical:
Catalyst Recovery in Fluidized Bed & Slurry Loop Reactors (PP, HDPE, LDPE, Fumed Silica & Polycrystalline Silicon, Maleic Anhydride, etc.)
Alternative Energy:
Biomass & Coal Gasification Flue Gas,
- Stainless steel material, resistant in high-temperature and/or corrosive environments
- Rating available from 3micron to 100 micron.
- Uniform pore distribution produces a barrier medium that exhibits low flow resistant characteristics and high void volume
- Backwashing for long service life.
Stainless Steel Filter Housing for for Oil and Gas Filtration
Stainless steel filter housings are used for the filtration of liquid or gas materials in major industries.
They are made of stainless steel(304, 316L). Inside installation avilable high flow type, pleated type, string wound type, melt blown type filters. Can be used for oil and gas filtration.
Midstream Mol-sieve Dehydration, Midstream Process Water, Refinery Alkylation, Refinery Amine Systems, Refinery Condensate Dewatering.
Refinery Final Product, Refinery Molecular Sieve Drier, Refinery React/Catalyst Protect, Completion Fluids Filt, Upstream Condensate, Upstream Injection Water & SRU, Upstream Offshore Boiler Water.
Upstream Offshore Produced Water, Upstream Onshore Produced Water, Upstream Onshore Surface Discharged Water, LNG Stabilization Column , Midstream Acid Gas.
Midstream Gas Pipeline Pigging, Midstream Glycol Filtration, Midstream Merc Rem Unit (MRU), LNG Acid Gas, LNG Other
- Stainless steel material: 304, 316L; for high temperature and pressure applications
- Inside filters available: high flow filters, pleated filter cartridge, string wound filters, melt blown type filters.
- Customized according to flow rate, filter liquid/gas,operating temperature and pressure.
Pullner Is Your Premier Filters Manufacturer For Oil and Gas Filtration In China
Oil and Gas Filtration Solutions
Water filtration are widely used in oil and gas industry: Oilfield water injection, Process circulating water filtration, cooling water filtration, amine liquid desulfurization, separation and purification of natural gas and oil refineries; Purification of fluids in the production process of hydrogen peroxide, lubricating oil, catalysts, etc. and particle removal and filtration of chemicals and oils.
Oilfield Water Injection
Pullner filter elements can remove impurity particles in the water, improve the water quality, increase the accuracy of oilfield water injection, and increase the development efficiency.
Process circulating water filtration
Industrial water mainly includes boiler water, process water, cleaning water and cooling water, sewage, etc. In order to protect the environment and save water resources, recycling water treatment is necessary. Pullner provide filtration solutions to remove dirt, microorganisms and other impurities in the water, purify the water quality, and reach the standard of reuse.
Cooling Water Filtration
Cooling water is widely used in many industries, such as power plants, oil refineries, and chemical industries. Solid pollutants in the cooling water can damage equipment, reduce productivity, and increase costs. We provide filtration solution to remove pollutants, ensure the quality of cooling water, protect plant equipment, and save production and maintenance costs.
Why Choose Pullner Filters for Your Oil and Gas Industry
Customize Service
According to different applications and situation, Pullner provide customize filtration solution, ensure high quality water for industry production.
On-site Technical Support
Pullner provide on-site technical support for customers, guide the installation and use of the filter element on site to better serve customers.
After-sales Service
Professional after-sales service team, 24 hours stand by, prompt response, ensure each customer’s filtration problem is resolved in time.
Other Types of Filters From Pullner
High Flow Filter Cartridge
Membrane Filter Cartridge
Pleated Water Filters
String Wound Filter
Melt Blown Filter Cartridge
Stainless Steel Filter Cartridge
Stainless Steel Filter Housing
