Power Plant Industry Filtration Solutions
Power Generation Industry Application
Pullner provide filtration solutions for power plant industry, which can improve the reliability of the equipment and reduce costs. Mainly used in condensate polishing, stator cooling water treatment, etc.
We provide different filter elements for water filtration, oil filtration, and air filtration in power station to ensure the safe operation of power generation assembly.
High Flow Water Filter for Power Plant Filtration
High flow water filter cartridge is one of the commonly used filter elements in power plants condensate water filtraiton, with large diameter, large filtration area, high flow rate, high filtration efficiency and long service life.
Reduce the number of filter elements required and housing dimension, save capital investment, and are deeply loved by users.
1.Condensate polishing 2.Pre-filtration for UF 3.Power plant boiler feedwater treatmetn
Pleated Water Filters for Power Plant Filtration
70″ condensate polishing pleated water filter cartridge, length 70″ (1778mm), micron rating from 1 to 20 micron, different precisions used as Start-up and operating filter element in Power generation.
Its pleated type, thermal melting welding, multiple times backflushing, designed for iron removal in condensate water of power generation.
1.Boiler condensater water filtration
2.Power plant boiler feedwater treatmetn
String Wound Filter Cartridge for Power Plant Filtration
String wound filter cartridge 70″ is a depth filter designed for power plant condensate iron removal, use with ot without resin precoat. Its filter media is contimuous wound fiber with high performances.
The length of the cartridge is up to 70inch (1778mm), the large lengh with big filtration area ensures to reduce the number of filter cartridges and the dimension of housing required.
The long service life and high flow rate result in low investment and less manpower in many applications.
Stainless Steel Filter Housing for Power Plant Filtration
High Flow Water Filter Stainless Steel Filter Housing is designed for high flow rates, this filter housing only requires a small area for installation and is cost efficient and easy to operate when compared to traditional cartridge filter housings.
It’s available in a horizontal or vertical configuration. Vertical configuration is normall install of 40″ filters. When flow rates over 1000m³/hr, we recommend a horizontal configuration with 60″ high flow fitlers, because it satisfies large flow rate application and is relatively easy to installation and change-out.
RO Prefiltration in power plant condensate water fitration.
Pullner Is Your Premier Filters Manufacturer For Your power plant Industry In China
Power Generation Filtration Solution
For environmental protection, the application of filtration is particularly important for power plants to achieve zero discharge of pollutants. Our filter element is suitable for power plant condensate system, condensate polishing, mixed circulating condensate, electroplating solution filtration, high flux condensate, supercritical boiler, etc.
Pullner filter element can remove iron, suspended solids, colloids and other pollutants from the condensate, protecting boilers and steam turbines from corrosion and hazards. After filtered, the condensate meets the boiler feed water standard, so as to achieve the purpose of recycling and reduce water usage overall. Maximize equipment reliability and power output, while reducing downtime and operating costs.