Seawater Desalination RO Pre-filtration High Flow Water Filter Cartridge
Seawater desalination plant RO system pre-filtration high flow water filter, diameter 6″/6.5″, length 20″/40″/60″, wide range of filtration rating.
Large filtration area provides high flow rates combined with low pressure drops and long service life. Graded filtration pore size in one high flow filter cartridge.
Multi membrane layers for large dirt holding. Less labor needed and lower operation & maintenance cost.
Application
Seawater desalination plant: RO system pre-filtration
Technical specification:
- Materials of Construction
Filter Material | PP：Deep Pleated PP/ Melt PP | FO：Organic Fiber | GF：Glass Fiber/Polyester |
Support/ Diversion | PP | Organic Fiber | Polyester |
End Caps | Fiberglass reinforced polypropylene | Fiberglass reinforced polypropylene | Fiberglass reinforced polypropylene |
Operating Characteristic
Maximum Operation Temperature | PP：82°C FO：120℃ GF：121℃ |
Maximum Operation Differential Pressure | PP：3.44bar / 21°C FO：3.44bar / 120°C GF：3.44bar / 121°C |
Design Parameter
Size (Diameter*Lengths) | Design Flow (m3/hr) | Maximum Flow (m3/hr) | Filter Area (m2) |
6″*20″ | 15 | 40 | 2.6 |
6″*40″ | 30 | 80 | 5.2 |
6″*60″ | 45 | 120 | 7.8 |
Ordering Information
PHF L PP 0500 40 G V ZA
Series | Type | Media | Micron | Length | Structure | Seal Material | End Cap Type | |||||||
PHF | L | PP | 0010 | =0.1μm | 1500 | =15μm | 20 | =20″ | G | =PP Outer Cage | V | =Viton | ZA | =Single-Ring（HFK） |
LH | PBT | 0100 | =1.0μm | 2000 | =20μm | 40 | =40″ | M | =Melt blown | S | =Silicone | ZB | =Double-Ring（HFK） | |
K | GF | 0500 | =5.0μm | 4000 | =40μm | 60 | =60″ | S | =Plastic net | E | =EPDM | ZA | =一Type（HFM） | |
M |
| 1000 | =10μm | 7000 | =70μm |
|
|
|
|
|
| ZB | =十Type（HFM） | |
W |
|
|
| 1000 | =100μm |
|
|
|
|
| None | =（HFL/HFLH） | ||