Pleated Water Filters with High Dirt Holding Capacity
HPPV series filter cartridges are made of multi-layer Nano-fiber materials, which have high fouling capacity under reasonable gradient structure design.
The multi-stage interception characteristic of gradual pore diameter from thick to fine makes the filter cartridge have stronger fouling capacity, can effectively improve the problem of rapid surface blockage, greatly extend the service life of the filter cartridge, suitable for filtration of high suspended particles, colloidal substances, high viscosity liquid, etc.
- Flow Rate
- 500 GPM
- Micron Rating
- 5, 10, 25 μm
- Max Temperature
- up to 80°C
Materials of Construction
| Filter Media | Polypropylene |
| Drainage | Polypropylene |
| Cage / Core / End Caps | Polypropylene |
Operating Characteristics
| Maximum Operating Temperature | 80℃ |
| Maximum Differential Pressure | 4 bar @ 21℃ / 2.4 bar @ 80℃ |
Filter Efficiency
Rows show the nominal pore rating of each cartridge model; columns show the particle size retained (in µm) at the stated removal efficiency.
| HPPV Model | >95% | >98% | >99.8% | >99.9% |
| 0.5µm | 0.3 | 0.5 | 0.65 | 0.8 |
| 0.8µm | 0.65 | 0.8 | 1.0 | 1.2 |
| 1.0µm | 0.8 | 1.0 | 1.2 | 1.5 |
| 1.5µm | 1.2 | 1.5 | 2.0 | 3.0 |
Biotech: Cell culture, direct flow filtration, process workflows, single-use solutions
Food & Beverage: Wine, beer, cider, distilled spirits, non-alcoholic drinks, dairy, food & ingredients, cannabis, utilities
Chemicals & Polymers: Process water, chemicals, petrochemicals
Microelectronics: Semiconductors, data storage, displays, graphic arts, photovoltaic
Oil & Gas: Upstream, midstream, downstream, EPC
Power Generation: Combined cycle plants, gas turbines, nuclear plants, steam plants, renewables
Desalination: RO plant pre-filtration
Pleated water filters with high dirt-holding capacity are engineered to trap large volumes of dirt and contaminants before clogging.
The pleated design maximises surface area, so the cartridge retains more impurities and lasts longer than conventional flat-sheet filters before needing replacement.
These cartridges remove sediment, dirt, sand, and even some bacteria and viruses, providing an efficient, cost-effective way to improve water quality.
Example: HPPV 0500 10 C1 E
| Series | Micron | Length | End Cap Type | Seal Material | ||
| HPPV | 0050 = 0.5µm | 05 = 5" | C1 | = 226 / Spear | E | = EPDM |
| 0080 = 0.8µm | 10 = 10" | C3 | = 222 / Spear | S | = Silicone | |
| 0100 = 1.0µm | 20 = 20" | C5 | = 222 / Flat | V | = Viton | |
| 0300 = 3.0µm | 30 = 30" | C6 | = 226 / Flat | P | = FEP | |
| 0500 = 5.0µm | 40 = 40" | C9 | = DOE | |||
| 1000 = 10µm | ||||||
| 2000 = 20µm | ||||||
| 4000 = 40µm | ||||||
| 7000 = 70µm | ||||||
| 9000 = 90µm | ||||||
Why Choose Pullner Filter?
More than just a supplier – we’re your technical partner in filtration solutions
Laboratory and Testing Facilities
In-house testing capabilities for materials and quality assurance with advanced equipment and certified technicians.
- Particle counting analysis
- Pressure drop testing
- Material compatibility testing
Design and R&D Services
Position as technical partner, not just supplier. Custom solutions for your unique challenges.
- Custom filter design
- System optimization
- Technical consultation
Free Services
Comprehensive free services to support your filtration needs without any hidden costs.
- Free testing for filtration systems
- Free custom filtration design
- Up to 2 free samples
Global Manufacturing
State-of-the-art manufacturing facilities with worldwide delivery capabilities and local support.
- ISO 9001 certified facilities
- Global logistics network
- Local technical support
English 
Spanish 
Arabic