Stainless Steel Wedge Wire Filter Cartridge, PHSV Series
The PHSV wedge wire stainless cartridge separates rigid large particles from liquids at 20 to 150 µm, with 5 to 50 GPM per 10″ element (suggested). For process engineers, welded V-shaped wire leaves uniform gaps and allows easy cleaning and backflushing; send operating conditions and your current element or housing model for a fit check or quote.
- Micron Rating
- 20-150 µm
- Flow Rate
- 5-50 GPM per 10"
- Max Pressure Drop
- 5 bar
- Max Temperature
- 480°C
- Material
- SS316L, SS304
- Size
- 25.4-130 mm OD · 5-40"
PHSV Wedge Wire Stainless Cartridge for Rigid Particles and Slurries
PHSV handles solid-liquid separation where the solids are hard, large particles. It is the wedge wire option in Pullner's stainless steel filter cartridge range.
How it works: ribs and V-shaped wires are spiral-welded to form the cartridge.
Key features:
- Welded V-shaped wire construction provides high strength and wear resistance.
- Custom outer diameters up to 850 mm extend the standard 25.4 to 130 mm range.
- Stainless steel construction offers corrosion resistance in 316L, 321 or 304.
Applications:
- Viscous liquids and polymers: PHSV filters rigid particles from high-viscosity slurries.
- Decarburization and sediment removal: PHSV removes solid particles.
- Industrial water: PHSV provides pre-filtration in power, chemical and municipal water plants.
| Series | PHSV |
| Micron Rating | 20-150 µm |
| Material | 316L, 321 or 304 stainless steel - special alloys on request |
| Outer Diameter | 25.4-130 mm; custom up to 850 mm |
| Length | 5", 10", 20", 30", 40" |
| End Connection | DOE, SOE, Customized thread |
| Seal Material | Silicone, NBR, Viton, EPDM |
| Flow Rate | 5-50 GPM per 10" element (suggested) |
| Max Pressure Drop | 5 bar |
| Max Temperature | 480°C |
| Certifications | ISO 9001 |
Who Buys PHSV Wedge Wire
PHSV suits plants separating rigid large particles from liquids or slurries with a cleanable, backflushable element.
PHSV Sizing and Limits
- Available lengths are 5", 10", 20", 30" and 40".
- Max pressure drop is 5 bar.
- Max temperature is 480°C.
Related Pullner Stainless Steel Cartridges
PHSV belongs to Pullner's stainless steel filter cartridge range linked above.
What to Send for PHSV
Fluid, flow rate, micron rating, temperature, pressure, current element or housing model, quantity and timeline.
Can PHSV Be Built to a Custom Diameter?
Standard PHSV outer diameters run from 25.4 to 130 mm, and custom builds go up to 850 mm. Special alloys are also available on request.
What End Connections Does the PHSV Series Use?
PHSV comes with DOE or SOE ends, or with a customized thread. Available seal materials for the PHSV Series are silicone, NBR, Viton and EPDM.
How Is a PHSV Element Cleaned?
PHSV wedge wire construction allows easy cleaning and backflushing. The cartridge has uniform gaps between its V-shaped wires and a max pressure drop of 5 bar.