Pre-Iron Filter Element For Condensate Polishing Treatment
Pre-iron filter element for condensate polishing treatment is belong to condensate polishing pleated water filter cartridge, length 70” (1778mm), micron rating from 1 to 20 micron, different precision used as Start-up and operating filter element in Power generation.
Its pleated type, thermal melting welding, multiple times back-flushing, designed for iron removal in condensate water of power generation.
- Boiler condensate water filtration
- Power plant boiler feed water treatment
Maintaining condensate quality is important in the steam / water cycle within industrial and power plant boilers to minimise corrosion in the circuit and prevent deposits forming on steam turbines.
When sea water cooled condensers are employed condensate polishing is especially important to remove any minor ingress of seawater into the condensate.
Our specialists design and build condensate polishing plants that efficiently, economically and sustainability remove contaminants from a wide variety of condensates, producing high purity demineralised condensate.
We have a wide range of technologies available including pre-filters, both disposable and back washable, along with mixed bed ion exchange polishers ranging from simple non regenerated designs to internally or externally regenerated.
Pre-iron filter element for condensate polishing treatment are absolute rated for 1 to over 20 microns and specifically designed to meet the demands of multi-backwashing without the loss of filter integrity.
Fixed pore construction eliminates dirt unloading as differential pressure increases while maintaining a removal efficiency of 99.9%.