Polypropylene Pleated Water Filters
Polypropylene pleated water filters are special filters made with a type of plastic called polypropylene, which is folded in a pleated design. These filters are commonly used to clean impurities like sediment, dirt, and other contaminants from water. They’re easy to install and quick to replace, making them a popular choice for many people who want to improve the quality of their drinking water.
The PPM series pleated filter cartridge combines the characteristics of deep filtration technology and pleating filter material to ensure that the filter cartridge has high dirt holding capacity and filtration area, especially suitable for filtration of high suspended particles, colloidal substances and high viscosity liquid.
Application
Biotech: Cell Culture, Direct Flow Filtration, Process Workflows, Single-use solutions
Food & Beverage: Wine, Beer, Cider, Distilled spirits, Non Alcoholic Drinks Dairy, Food& Ingredients Cannabis, Utilities
Chemicals & Polymers: Process water, Chemicals, Petrochemicals
Microelectronics:Semiconductors, Data Storage, Display, Graphic Arts, Photovoltaic
Oil &Gas: Upstream, Midstream, Downstream, EPC
Power Generation: Combined cycle plants, gas turbines, nuclear plants, steam plants, renewable
Desalination plant: RO Plant pre-filtration
Technical Specification
- Material Constructions
Filter Material | Polypropylene |
The diversion layer | Polypropylene |
Cage/Core/End Cap | Polypropylene |
Operating Characteristic
Maximum Operating Temperature | 80℃ |
Maximum Positive Difference Pressure | 4bar/21℃ |
2.4bar/80℃ |
III.Filter Efficiency
PPM | ＞95% | ＞98% | ＞99.8% | ＞99.9% |
0.3μm | 0.15 | 0.22 | 0.25 | 0.3 |
0.5μm | 0.22 | 0.4 | 0.45 | 0.5 |
1.0μm | 0.5 | 0.65 | 0.8 | 1.0 |
5.0μm | 1.5 | 2.0 | 2.5 | 3.0 |
Ordering Information
PPM 0300 10 C1 E
Series | Micron | Length | End Cap Type | Seal Material | ||
PPM | 0030=0.3μm | 05=5″ | C1 | =226/Spear | E | =EPDM |
0050=0.5μm | 10=10″ | C3 | =222/Spear | S | =Silicon | |
0100=1.0μm | 20=20″ | C5 | =222/Flat | V | =Viton | |
0300=3.0μm | 30=30″ | C6 | =226/Flat | P | =FEP | |
0500=5.0μm | 40=40″ | C9 | =DOE | |||
If you are looking for a pre-filtration water filter, a PP pleated water filter cartridge is a good option. They are effective, affordable, and easy to maintain.
Here are some of the most common contaminants that can be removed by PP pleated water filter cartridges:
- Sediment
- Rust
- Sand
- Dirt
- Microbial contaminants (bacteria, viruses, protozoa)
- Pesticides
- Herbicides
- Fertilizers
- Heavy metals
- Chemicals
PP pleated water filter cartridges are a good choice for a variety of applications, including:
- Home water filtration
- Commercial water filtration
- Industrial water filtration
- Laboratory water filtration
- Medical water filtration
When choosing a PP pleated water filter cartridge, it is important to consider the following factors:
- The size of the particles that need to be removed
- The flow rate of the water
- The type of water
- The desired lifespan of the filter
PP pleated water filter cartridges are a versatile and effective way to improve the quality of water. They are a good choice for a variety of applications and can be used to remove a wide range of contaminants.