High Flow Water Filter Cartridge Replace Replace Parker Filters
PHFK Series High Flow Filter Cartridge is made of diameter 6″ and pleated design, with high-strength pp center core, outside to inside flow direction. Outer cage have two types: integral pp cage and polyester mesh.
Application:
- RO pre-filtration, desalination pretreatment and a variety of process water filtration;
- Power plant supplementary water, condensation water, coolant filtration;
- Biopharmaceutical industry pharmaceutical raw materials, solvents, water filtration;
- Petrochemical industry various solvents, quench water, brine and other chemicals filtration.
Technical Specifications:
- Micron: 0.1μm, 0.5μm, 1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm
- Maximum operating temperature: Pleated/melt-blown pp: 82 or Pleated glass fiber: 121℃
- Maximum operating differential pressure(Inside to outside flow direction): Pleated/melt-blown pp: 3.44bar@82℃ or Pleated glass fiber: 3.44bar@121℃
- Suggestion pressure for filter replacement: 2.5Bar@20℃
- Suggestion design flow: 40″: ≤20m3/h or 60″: ≤40m3/h
Ordering Information
Series | Type | Media | Micron | Length | Structure | Seal Material | End Cap Type | |||||||
PHF | K | PP | 0010 | =0.1μm | 1500 | =15μm | 20 | =20″ | G | =PP Outer Cage | V | =Viton | ZA | =Single-Ring（HFK） |
PBT | 0100 | =1.0μm | 2000 | =20μm | 40 | =40″ | S | =Plastic net | S | =Silicone | ZB | =Double-Ring（HFK） | ||
GF | 0500 | =5.0μm | 4000 | =40μm | 60 | =60″ | E | =EPDM | ||||||
1000 | =10μm | 7000 | =70μm | |||||||||||
1000 | =100μm | |||||||||||||