High Flow Water Filter Cartridge Replace Pentair Aqualine
PFLBT series high flow filter cartridge is Pentair Aqualine high flow water filter cartridge replacement. The polypropylene construction provides superior chemical resistance.
It’s large diameter (6.75″) with an outside-inside flow realizing the use of significantly smaller housing and fewer filter elements. Better cost-efficiency, Lower expense, customized service. Reduce the operation and maintenance cost of filter element.
Application
Microelectronic: Semiconductor, Data storage, Display industry, Ultra-pure water, CMP and wet etch and cleans;
Pharmacy Industry: Preparations filtration,Sterile APIS, Biological products;
Food & Beverage: Bottled water, Beer, Soft drink, Dairy filtration;
Power plant: Condensate system,recycling and reduce water;
Desalination: SWRO system, RO Plant;
Oil & Gas: Process water filtration;
Automotive: Parts washing, pre-treatment and Electroplating, Sealant, Paint and Coatings;
Technical Specification
6.75″ large diameter and 40″/60″ length.
Melt blown polypropylene filter media.
Strengthened PP center core.
23 times square feet of media than used in standard 10″ pleated filter.
Positive O-ring seal.
Wide range of chemical compatibility.
Perfect match to original Pentair Aqualine high flow FRP vessels.
Better cost-efficiency in RO pre-filtration process.
OEM/ODM services available.
Multi layers membrane structure provide graded filtration
Ordering Information
Series | Type | Media | Micron | Length | Structure | Seal Material | ||||||
PHF | BT | PP | 0010 | =0.1μm | 1500 | =15μm | 20 | =20″ | G | =PP Outer Cage | V | =Viton |
PBT | 0100 | =1.0μm | 2000 | =20μm | 40 | =40″ | M | =Melt blown | S | =Silicone | ||
GF | 0500 | =5.0μm | 4000 | =40μm | 60 | =60″ | S | =Plastic net | E | =EPDM | ||
1000 | =10μm | 7000 | =70μm | |||||||||
1000 | =100μm | |||||||||||