خرطوشة فلتر الألياف الزجاجية
Glass fibre earns its place on cost per litre filtered, not on retention. The fibres are far finer than a spun polymer and can be laid in a graded structure, so the media holds substantially more dirt before it reaches the same differential pressure. On a heavily loaded line that is the difference between changing elements weekly and changing them monthly.
The PLGF cartridge is offered in seven grades from 0.1 to 10 µm, on a 2.7″ (69 mm) body in five lengths from 5″ to 40″. Standard duty is oil and gas and petrochemical process filtration: amine sweetening, glycol dehydration, produced water and general hydrocarbon polishing.
- تصنيف الميكرون
- 0.1–10 µm
- معدل التدفق
- 1–5 GPM per 10"
- درجة الحرارة القصوى
- 80°C (176°F)
- SKU
- PLGF
- Ultrafine glass fibre media — more capacity than PP at equal differential pressure
- Seven grades from 0.1 to 10 µm
- Five lengths — 5", 10", 20", 30", 40"
- Hydrocarbon-rated seals — Viton and FEP available
- Rated 80 °C with pressure published at two temperatures
- آيزو 9001 with batch documentation on request
| السلسلة | PLGF |
| وسائط الترشيح | Ultrafine glass fibre, pleated |
| Micron rating | 0.1 · 0.2 · 0.45 · 1 · 3 · 5 · 10 µm |
| Outer diameter | 2.7" (69 mm) |
| Length options | 5" · 10" · 20" · 30" · 40" |
| الغطاء النهائي | DOE · SOE (226 fin, 226 flat, 222 fin, 222 flat) |
| O-ring / gasket | EPDM · silicone · Viton · FEP |
| Flow rate | 1–5 GPM per 10" element (suggested) |
| Max. differential pressure | 4 bar at 21 °C · 2.4 bar at 80 °C |
| Max. temperature | Up to 80 °C (176 °F) |
| الشهادات | آيزو 9001 |
| Minimum order | 25 pieces |
| Lead time | 7 working days |
- Oil and gas: amine, glycol and produced water filtration.
- Petrochemical: hydrocarbon polishing and process clarification.
- High-load duty: where a PP pleat blinds too quickly.
- الترشيح المسبق: protection ahead of finer membrane stages.
Both filter. They cost differently over a year.
| بولي بروبيلين | Glass fibre | |
|---|---|---|
| Cost per element | Lower | Higher |
| Dirt-holding capacity | Baseline | Substantially higher at equal ΔP |
| Change-out frequency | Higher | Lower |
| Best on | Light, clean feeds | Heavy or variable loading |
The decision is straightforward: if elements are being changed more often than the labour and downtime justify, the cheaper element is the expensive one. On light duty PP remains the correct specification and glass fibre is money spent on capacity that never gets used.
Four seals are offered and they are not interchangeable on this service.
Viton and FEP are the specifications for hydrocarbon duty. EPDM is offered on the same body for aqueous service and is not compatible with most hydrocarbons — it swells, loses compression and lets fluid past the element rather than through it. Silicone sits between the two and should be confirmed against the specific stream.
Send the fluid, its concentration and its working temperature with the enquiry. Pullner confirms the seal against the stream before quoting, and on hydrocarbon service that check matters more than the grade selection.
Up to two samples ship worldwide free of charge, with freight paid by the customer.
لماذا تختار فلتر بولنر؟
نحن أكثر من مجرد مورد - نحن شريكك التقني في حلول الترشيح
مرافق المختبرات والاختبارات
قدرات اختبار داخلية للمواد وضمان الجودة مع معدات متطورة وفنيين معتمدين.
- تحليل عد الجسيمات
- اختبار انخفاض الضغط
- اختبار توافق المواد
خدمات التصميم والبحث والتطوير
وضعك كشريك تقني وليس مجرد مورد. حلول مخصصة لتحدياتك الفريدة من نوعها.
- تصميم فلتر مخصص
- تحسين النظام
- الاستشارات الفنية
الخدمات المجانية
خدمات مجانية شاملة لدعم احتياجاتك من الترشيح دون أي تكاليف خفية.
- اختبار مجاني لأنظمة الترشيح
- تصميم الترشيح المخصص المجاني
- ما يصل إلى 2 عينات مجانية
التصنيع العالمي
منشآت تصنيع متطورة مزودة بأحدث مرافق التصنيع مع إمكانات توصيل عالمية ودعم محلي.
- منشآت حاصلة على شهادة الأيزو 9001
- شبكة الخدمات اللوجستية العالمية
- الدعم الفني المحلي
English 
Spanish 
Arabic